HYDROBIL

TEMPERATURBEREICH: Maximale Betriebstemperatur von 120⁰C.

Max. Temperature: 100C

Solid quality: Only high-quality materials were used in the manufacture of our products, which score points with their careful workmanship.

High quality products

Max. Temperature: +100C

1.5 BAR

MAX. WORKING TEMPERATURE: +120C

The reducer will find its application during installation or repair of hot water or central heating systems and drinking water installations in buildings.The product will ensure proper liquid circulation in the pipes which will improve the functioning of the central heating system.

Größe: 1/2" AG x 1/2" IG (1/2" männlich x 1/2" weiblich)

Max. Temperature: +100C

Directions for use: Clean connections. Apply a thin layer of paste to the cleaned end of the tube, and then insert the pipe into the coupling's sleeve as far as it will go. With a blowtorch, heat the joint evenly until the solder sticks to the edge and melts freely and forms a closed ring. After soldering, wipe the connection point with a damp cloth and rinse the system with water in accordance with the regulations. The workplace should be adequately ventilated.

A water pipe connector in elbow shape has two female outlets: can withstand the water pressure up to 10 bar. Maximum installation temperature 45 ° C.

Thread type: Female x Male

A water pipe connector in T-shape has three female outlets: 2 x 25 + 1 x 20 mm and can withstand the water pressure up to 10 bar. Maximum installation temperature 45 ° C.

Anwendung: für den Einbau in Wasserleitungen und Heizungsanlagen;

CORROSION-RESISTANT: Thanks to the solid material and careful workmanship, the product is resistant to moisture and, therefore, to corrosion.

Max. Temperature: +100C

High quality products

Type of application: The product can be used in typical soldering processes such as flame soldering, induction soldering, resistance soldering and piston soldering. The product is suitable for professional as well as private use.